Shop with Banzai Hobby!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - TimMather

Pages: [1] 2 3 ... 6
Showcase / Chars Lambo
« on: May 28, 2017, 04:19:33 PM »
zeon lambo, used ashoma lamborghini kit and also a resin liberty walk upgrade kit for the wheels and arches.
had to cut away and resculpt arches so i could get the right stance.
turned out ok, really not happy with the clear parts, but oh well live and learn.

multiple images upload

Showcase / Re: MG Gelgoog 2.0 Anavel Gato Custom
« on: May 28, 2017, 04:11:58 PM »
love this one, gray is the new metallic.

Showcase / petit bearguy
« on: May 10, 2017, 11:36:43 PM »
filled seams, then primed and wet sanded, then used gaia gloss black, then mixed chameleon pigment powder into gaia gloss clear which is cheaper than using overpriced chameleon model paints, finally i use quartz liquid glass 2 part auto clear for shine.
the pink part was gaia silver, then mr color gx pink clear, with a top coat of liquid glass again.


Reference Material / Re: youtube inspiration videos
« on: April 13, 2017, 12:58:46 AM »
some of my shameless promotion....

Reference Material / youtube inspiration videos
« on: April 13, 2017, 12:56:14 AM »
no tutorial videos, no wip videos, only videos of finished work for inspiration.

Q & A / Re: Painting Pre-molded Joints?
« on: April 11, 2017, 04:03:04 AM »
agree with simon, lacquer is hardest best to use, although i got away with enamel with alclad on these hands. dont pose the kit of even move joints before taking photos.

multiple image

Showcase / Re: 1/100 Geara Doga Full Frontal Custom
« on: April 11, 2017, 03:43:14 AM »
love it, the figures really bring the weathering to life and gives it great sence of scale. bravo/

Showcase / Re: ASW-G-08 Gundam Barbatos Lupus 1/100
« on: March 23, 2017, 01:36:44 PM »
Tim, come on. This is a forum for feedback, if you don't want any then don't post. Stop acting up.
the guy is toxic, condescends everyone. look at his other posts.
im not an idiot, i know what need to work on and i know valid criticism, the guy is nit picking and looking for stuff to criticize. 
but whatever, i wont say anymore.

Showcase / Re: ASW-G-08 Gundam Barbatos Lupus 1/100
« on: March 23, 2017, 01:20:16 PM »
Sorry man, didn't realize you would lose your shit over input. Next time I'll be sure to baby you and only say how amazing you are.
i didnt lose my shit at your comment on my last thread, but seams you are rather toxic and do this on alot of threads, you should calm down lad.
also dont dish it out if you cant take it, just friendly advise.

Showcase / Re: ASW-G-08 Gundam Barbatos Lupus 1/100
« on: March 23, 2017, 02:51:09 AM »
Unique take on the Barbatos. Has that Seed feel with the lettering decals and clean look. My only criticism is the yellow on the skirt, chest, and knee aren't panel lined and it sticks out because of it. The overall paint is super smooth. Great job overall!
dude, i dont think you are in any position to keep dishing out advise to everyone. last time i bit my tongue, but looking at all your replies seems you dish out advise to everyone.
heres some advise to you, learn how to not have nasty silvering on your decals, learn to sand nubs and not have big nasty mold seams, because your comments are writing cheques, your lax modelling cant fix!
you know, just "friendly advise"

Showcase / ASW-G-08 Gundam Barbatos Lupus 1/100
« on: March 21, 2017, 06:29:16 AM »
Heres my latest build, made a few color changes, but still mostly standard colors.
ive been getting into painting my inner frames gray and putting more effort into them by putting warnings on the inner frame and also using PE and painting it light gray to give extra detail on the joints.
drilled out forearms and added black metal exhausts, the knees were drilled and screws added, the side skirts were glued, filled and pla plate added to parts where i could not fill seams, the blue part on side skirt is a seporate part, so removed some plastic and added the gold mesh to the vent.
the shoulders were drilled and JAO parts screws were added.
HIQ decals were used for all warnings, and logos are all custom made by wessex transfers, used carbon decal on backpack which i guess isnt really "in-scale" but i like it.
bandai dont make the proper claw hands for the 1/100 kit, but found that you can use use the 1/144 lupus rex oversized hands which are perfect fit for the 1/100 lupus.
color changes...
shoulders went from red outer and white inner, to white outer and red inner.
and changed center of V-fin to white and also made foot claws white to match white claws on hands.
knees were just reverse washed with enamel green and the sword/mace was first reverse washed white and then reverse washed again with the green so its bright.
primer alclad white.
gaia brilliant white
mr color yellow
gaia ultra blue
mr color red
gaia black
inner frame grays mr color 331, 73
humbrol fluro green enamel
gaia blade silver
gaia starbright gold
alclad chrome
gaia clear red(shoulder inner part)

pix image

Showcase / Re: G-System Kshatriya 1/72
« on: February 05, 2017, 12:04:30 PM »
very nice, clean build. 10/10

Showcase / RE 1/100 heeled MSF-007 MKIII
« on: February 05, 2017, 07:40:52 AM »
my version of MSF-007 MKIII, for a scratch building comp on facebook, so did afew mods, firstly gave it a set of high heels, then altered the waist and made length taller and cut away the waist to give it a IBO style with MSG pistons.
the legs i used plaplate and rescribed to give some more interest, also cut away area for rectangle photoetch, also drilled for metal beads, and i boxed off the knee part so looks solid.
outside of backpack i cut away area so looks like a proper vent, also on the wing parts i glued and removed seams that didnt look right, also added 2 feul tanks.
used metal beads, all metal thrusters, photoetch on shoulders and back/side of legs.
on the innerframe i used mr color gloss grays so i could decal the innerframe parts then use satin top coat.
outer armor was sea gray and orange mr color which was primed in white so orange stays bright.
DECALS are mostly hiq warnings and a few 3rd party mk3 logos, numbers are HIQ.
PANEL WASH was charcoal sludge wash and top coat is matt alclad.

Works in Progress / Re: WIP Regulation Center Gerbera Tetra
« on: January 08, 2017, 06:46:08 AM »
dont envy you, i know rich flanagan did a really nice painted build of one of these and looked great.
see you are changing the thrusters on shoulders, are you going to use metal thrusters throughout or just shoulders?

Online Retailers / Re: how to use taobao and bhiner
« on: January 02, 2017, 07:05:38 PM »
list of saved links in case i lose them.

special metal parts...

HQO metal parts...


should keep you going.

Pages: [1] 2 3 ... 6